6 Symptoms of a Bad Speed Sensor

Modern cars have advanced technology that notifies car owners of the performance and health of their vehicle, one of them is the speed sensor.

The Vehicle speed sensor; also referred to as the transmission speed sensor is the technology responsible for calculating the driver’s speed with the help of a device placed on the transmission.

It’s able to do this by calculating the rotational speed of a toothed wheel located on a shaft in the transmission. The power control modules then pick up these small voltage signals, balances them, and relay them on the speedometer.

Also, the input shaft sensor and output shaft sensor are the two sensors that work hand in hand to provide the PCM accurate results.

When a speed sensor goes bad, it doesn’t just stop relaying this information to the control modules but it affects the functionality of components such as the engine and other systems which rely on its feedback to regulate the car’s operation.

This will also cause your check engine light to come on since the PCM isn’t able to verify the details provided by the sensors.

Despite the fact that most car experts can continue driving their cars with a faulty speed sensor, it will reduce your driving efficiency if you’re a newbie.

So, it’s relevant that you take note of certain symptoms that’ll signify that your speed sensor is going bad.

Continue reading to check out our top 6 signs of a bad speed sensor.

What are the Common Signs of a Bad Speed Sensor

If you notice one or more of the following symptoms on your vehicle, then it could be a signal that your speed sensor(s) are faulty.

1. Check Engine Light will Ignite

Once the PCM starts getting incorrect readings from the Vehicle speed sensor, it’ll store a diagnostic trouble code and the check engine light will turn on.

If you don’t know the specific sensor that went bad, you can connect your car to an OBD-II scanner to read the code.

You can further visit an auto repair shop for complete troubleshooting and fixing.

2. Abnormal Readings on the Speedometer

Due to wrong data being sent to the PCM, the speedometer will record abnormally high readings.

It could even be bad to the extent that nothing would be displayed on the speedometer.

3. Improper Gear Operations

Most cars use the data provided by the PCM to regulate actions such as gear switching. Once the VSS starts relaying incorrect data to the control module, there could be delayed or limited gear operations.

This will result in rough and abnormal gear operations. You can reach out to a mechanic to get this issue fixed.

4. Cruise Control Unavailability

The transmission speed sensor also monitors and aids the functioning of the cruise control. This will become unavailable once the PCM records an error code and turns the check engine light on.

You’ve to seek the service of a mechanic to get your cruise control to start working again.

Recommended:  How to Slash Tires Easily

5. Inability to Apply the Torque Converter Clutch

The torque converter clutch aids in providing a connection between the engine and the transmission in order to reduce transmission fluid temperature.

With the wrong data being provided to it, the Torque Converter will not be able to provide a link between these two systems.

The effect of this is increased fuel mileage, slipping, and overheating engines.

6. Hard Starting

Once the speed sensor goes bad while the engine is idle, you’ll experience a hard start because the ECU can’t decipher the position of the crankshaft or camshaft because of improper timing.

That’s it.

So, if you want to know what happens when a speed sensor goes bad then this article is for you.

Causes of a Bad Speed Sensor

1. A broken or Damaged Speed Sensor

The impact from external forces could cause the speed sensor to break, excess heat could also cause untimely damage to it.

Also, the speed sensor consists of magnetic components that might get worn out over time resulting in incorrect readings.

2. An issue in the wiring harness of the speed sensor

The speed sensor consists of internal wiring that helps in sending data to the PCM. Issues in the wiring harness can cause improper or no information to be sent to the PCM.

Until the speed sensor is replaced or repaired then you’ll continue driving with an incorrect speedometer.

3. Dirt Accumulation on the speed sensor

Failure to perform regular clean up will cause metal particles, dirt, heat, and mud particles to clog your speed sensor.

Recommended:  White Automotive Primer: All you Need to Know

This will cause the speed sensor to defect and start sending wrong signals to the power control modules.

Can I drive my car with a bad speed sensor?

Yes, but it’s not advisable there’s no way to decipher how fast you’re driving because of improper speedometer readings. This is a crime, especially in countries that have preset driving speeds.