How to Clean Mechanic Hand

Dirty, grease, oil, and paint stains on hands are one of the daily challenges common to a mechanic. If the hands are left without proper clean up can dry up and start cracking. Also, prolonged skin contact with grease and oil can lead to certain skin conditions such as dermatitis or skin cancer.

I would be teaching you how to clean mechanic hands which is beyond the use of water and soap, and this will save you hours you would have spent at the sink trying to wash your hands clean.

Tips for Cleaning Mechanic Hands

  • Always wash your hands properly before cleaning the injured part
  • Always put on your hand gloves when possible.
  • Carry out the task gently.
  • Keep methylated spirits and iodine close to you or even in your safety box.

How to Clean Mechanic Hands

Cleaning grease and engine oil from your hands have so many benefits. Therefore it is highly advised to take proper care and cleaning of your mechanic hand

1. The Use of salt/sugar for scrubbing

Often times a simple hand wash with water and soap would not be able clear away all the stains. Therefore scrubbing your hands with salt or sugar could help eliminate some stubborn stains.

Recommended:  Drivetrain Malfunction BMW: Symptoms, Causes, Diagnosis and Fix

Get a spoonful of sugar or salt and add to a half tablespoon of water. Scrub your hands with it then use a pumice stone to rub your hands to help remove the stubborn stains. Then rinse your hands and then wash with soap and water to remove leftover stains.

2. The Use of WD-40 lubricant

WD-40 is an oil-based lubricant that plays a great role in loosening tight screws and bolts. Asides from its function as a lubricant, it can also be used in cleaning oil and grease from mechanic hands.

Apply WD-40 lubricant on your hands by spraying, then rub your hands and spread the oil all over the affected areas. Allow for about 10 minutes and then wipe off the excess oil with a paper towel. Finally, wash your hand using soapy water then rinse and dry off. Repeat the process if there are still traces of oil in your hands.

3. The Use of Olive oil or Baby oil

This is another method that could be used to clean mechanic hands and it is skin-friendly.

Place a drop of the oil on your hands and gently rub properly all over the palm ensuring it gets between the fingers and even the knuckles. Leave for about 10 minutes, after which you are to rinse off with enough water and detergent then dry. Repeat the process if there are still leftover stains.

4. The Use of Sugar/Salt and Cooking oil.

This method is a home remedy for cleaning greasy stains.

Make a mixture of about three teaspoons of sugar with cooking oil. Rub the mixture properly all over your hands concentrating on the areas with deep stains then rinse off with lukewarm running water. If there are some stains left under the nail remove them using a toothpick or nail stick.

Recommended:  Tire Sidewall Bubble – Meaning, Causes and Possible Fixes

FAQs

Q: Which solvent can be used to remove grease from the hand?

A solvent such as Conc. isopropyl alcohol which is also known as rubbing alcohol can do a great job removing grease from hands. Also, hand sanitizers can equally be helpful in the removal of grease from hands.

Q: How Mechanics Can Avoid Dings and Cuts?

Mechanics also have to deal with dings and cuts on arms and hands in addition to having dirty hands.

Those working with mechanical parts have been warned by the U.S Bureau of Labor and statistics to be careful about sensitive mechanical parts and edges. Additionally, always use a wrench while working on a tough bolt. Always Work calmly and safely to prevent accidents like this.

Q: How do you remove engine oil from your skin?

There are a few methods that could be used to get oil off the skin, such as:

  • Scrub your hands with instant coffee before washing them.
  • Scrub your hands with WD-40.
  • Mix liquid soap and sugar.
  • Scrub the hand with a hand cleaner containing pumice.
  • The use of a water-optional citrus-based cleanser.

Q: How do I clean greasy mechanic uniforms?

For easy cleaning of Greasy mechanic clothes

  • Soak uniform in Soda Water
  • Wash with Dish Soap as dishwashing soap can cut through oil and grease making it a great way to cut through the stains in your uniform too.
  • Wash with Baking Soda, baby powder, or cornstarch will get the work done.

Conclusion

You can always protect your hands with mechanic gloves when it’s possible to avoid oil or grease stains while working. But as we do know, there are times when using gloves seems possible therefore washing off your hands soon as you finish your work, could be the best thing to do.

Recommended:  How to Clean Whitewall Tires Properly

You could try homemade remedies such as the combination of sugar/salt and cooking oil if you have very delicate skin. Kindly drop your questions/suggestions in the comment section.